Rinse for the push pickling line
The rinsing area of the pickling line, which consisted of 4 sections, was removed and replaced by a 5-stage short rinse with 5 cascades including steel substructure.
Four normal and one high-pressure injection stages are arranged in the cascades. Design of the rinsing vat as a steel construction with collecting trough and rubber-coated inside.
A blow-off device for the top and bottom of the belt and an edge blow-off device have been installed in the sink outlet area. A transfer table with support rollers was used to bridge the distance behind the last squeezing roller to the existing belt dryer.
After the installation the speed could be increased around 50%.
Technical Data:
- Strip speed 0 - 150 m/min
- Coil Outer Diameter max. 1.700 mm
- Coil Width: min. 150 - max. 450 mm
- Strip thickness: 1,2 - 14 mm
- Material: hot-rolled carbon steel and alloyed steels
Industry: Cold rolling
Customer: BUDERUS Edelstahl GmbH
